EIGRP

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname austin

austin(config)#int fa0/0

austin(config-if)#ip add 172.16.10.1 255.255.255.0

austin(config-if)#n shu

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

austin(config-if)#ex

austin(config)#int s2/0

austin(config-if)#ip add 172.16.20.1 255.255.255.0

austin(config-if)#n shu

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

austin(config-if)#ex

austin(config)#rou eigrp 10

austin(config-router)#network 172.16.10.0 0.0.0.255

austin(config-router)#network 172.16.20.0 0.0.0.255

austin(config-router)#network 172.16.30.0 0.0.0.255

austin(config-router)#

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname houston

houston(config)#int fa0/0

houston(config-if)#ip add 172.16.30.1 255.255.255.0

houston(config-if)#n shu

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

houston(config-if)#ex

houston(config)#int s3/0

houston(config-if)#ip add 172.16.20.2 255.255.255.0

houston(config-if)#clock rate 64000

houston(config-if)#n shu

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

houston(config-if)#ex

houston(config)#rou eigrp 10

houston(config-router)#network 172.16.10.0 0.0.0.255

houston(config-router)#network 172.16.20.0 0.0.0.255

houston(config-router)#

%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.16.20.1 (Serial3/0) is up: new adjacency

houston(config-router)#network 172.16.30.0 0.0.0.255

houston(config-router)#

ip pc 1 = 172.16.10.10
subnet mask = 255.255.255.0
gateway = 172.16.10.1

ip pc 2 = 172.16.30.30
subnet mask = 255.255.255.0
gateway = 172.16.30.1


ping dari pc 1 ke pc 2
ping ke 172.16.30.30

ping dari pc2 ke pc1
ping 172.16.10.10